92 instruments across 20 categories.

The MD 9260 is the first Metrel instrument to support measurements up to 1500 V with CAT III safety. Its voltage range and safety make it useful in highly demanding environments like solar power plants, wind power plants, or other high power environment using DC current. It has 2

The Syscompact 400 portable is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and

The MI 2891 Power Simulator is a multi-purpose three phase power simulator for simulating typical situations in low voltage power supply systems. It is an excellent tool for training, demonstration purposes, or as an electrical didactic tool. The simulator has some pre-programmed

The MI 2893 Power Master XT is a hand-held three phase power quality analyzer with a large easy-to-read graphical color display enabling the user to detect harmonics, phasors, waveforms and transients with sampling frequency 1 MSamples/sec in the installation simply by connecting

The MI 3121H Smartec 2,5 kV Insulation / Continuity is the portable measuring instrument for complete diagnostic testing of insulation and continuity measurements. Due to insulation resistance measurement with the test voltages up to 2.5 kV (measuring range is up to 100 GΩ) and c

The MI 3215 TeraOhmHP 15 kV is a high power, portable, battery or mains powered test instrument with excellent IP protection (IP65), designed for analysing insulation resistance by using high DC test voltages of up to 15 kV. Because of its robustness (CAT IV measuring category) a

The MI 3211 TeraOhmHP 10 kV is a high power, portable, battery or mains powered test instrument with excellent IP protection (IP65), designed for analysing insulation resistance by using high DC test voltages of up to 10 kV. Because of its robustness (CAT IV measuring category) a

The MD 9055 is another name for versatility in a small package. It supports a large number of measurements that make it a staple in both industrial and research environments. It has a 60000 counts display and supports a very wide array of measurements, including auto-hold of the

Multifunctional test device Relay Timing Tests Turns Ratio Tests Micro-ohmmeter 3Φ Circuit Breaker Timing Tests Built-in Battery (Optional) SUWI Series is designed using advanced engineering technology to test power and control equipment in the substations. SUWI is an all-in-one

The TRAN series of instruments are designed to measure the turns ratio and winding resistance of three-phase and single-phase transformers. Via its user-friendly interface, the TRAN instrument/s provide a fast and accurate assessment of key transformer parameters. TURNS RATIO MEA

The IRG 400 is an efficient time domain reflectometer for cable fault pre-location that provides fast and precise measurement results. The choice is yours, as the IRG 400 is available as a portable device in a transport case or as a 19″ plug-in unit in the Syscompact 400 and Sysc

The Syscompact 400 is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested s

1. Function: Proximity warning and alarm 2. Alarm Voltage Range: AC 40V~1KV 3. Working Frequency: 50Hz/60Hz 4. Electricity Testing Mode: Non-contact mode 5. Detection Mode: Automatic trigger [my_shortcode]

1. After the operator wears the alarm, and close to the high voltage charged body for a certain distance, the alarm will send out a sound and light alarm according to the safety distance of the corresponding voltage level to remind the electrical worker to pay attention to safety

Applied to on-site high voltage line electricity testing, identify voltage level of high voltage system, inspect fault of high voltage line, repair the inspect induced voltage of the neon lamp, high voltage sodium lamp, inspect residual high voltage or induced voltage, etc. Elect

1. Wireless high voltage line electricity testing ,high voltage line voltage test. 2. Electricity Testing Level: 380V~220kV 3. Voltage to Earth Display Range : 0.1kV~150kV(Voltage to earth) 4. Data Storage : 99 groups [my_shortcode]

CIBRE-L3, 3-Contact Circuit Breaker Analyser is designed using advanced engineering technology to test contact timings of circuit-breakers. CIBRE-L3 has fast, easy and accurate measurement features by its user-friendly software. CIBRE-L3 is a battery-powered device (optional feat

CIBRE-L6, 3-Contact Circuit Breaker Analyser is designed using advanced engineering technology to test contact timings of circuit-breakers. CIBRE-L6 has fast, easy and accurate measurement features by its user-friendly software. CIBRE-L6 is a battery-powered device (optional feat

ARES-200D is a micro-ohmmeter produced using advanced engineering technologies which can apply up to 200 A current. With its easy-to-use software, ARES-200D can easily measure contact resistances of circuit breakers, shunt and disconnector by applying adjustable current from 1A t

WINRES-20 BLUE is designed using advanced engineering technology to measure the winding resistance of transformers. WINRES-20 BLUE can measure current, voltage, power transformer windings and shunt resistors. Applying up to 20A Direct Current allows WINRES-20 BLUE to measure the

WINRES-20B is designed using advanced engineering technology to measure the winding resistance of transformers. WINRES-20B can measure current, voltage, power transformer windings and shunt resistors. Applying up to 20A Direct Current allows WINRES-20B to measure the resistance o

CIBRE-60, 6 Contacts Circuit Breaker Analyser is designed by advanced engineering technology to test contact timings of circuit-breakers. CIBRE-60 has a fast, easy and accurate measurement features by its user-friendly software. CIBRE-60 is a battery-powered device (Optional feat

CIBRE-30, 3 Contacts Circuit Breaker Analyser is designed by advanced engineering technology to test contact timings of circuit-breakers. CIBRE-30 has a fast, easy and accurate measurement features by its user-friendly software. CIBRE-30 is a battery-powered device (optional feat

VABO-80B is designed by advanced engineering technology to test circuit-breaker vacuum bottles up to 80 kV DC. VABO-80B has a fast, easy and accurate measurement features by its user-friendly software. VABO-80B is a built-in battery-powered device, which allows users to perform t

VABO-80 is designed by advanced engineering technology to test circuit-breaker vacuum bottles up to 80 kV DC. VABO-80 has a fast, easy and accurate measurement features by its user-friendly software. VABO-80 is a battery-powered device (optional feature), which allows users to pe

WINRES-20 is designed by advanced engineering technology to measure the winding resistance of transformers. WINRES-20 can measure current, voltage, power transformer winding and shunt resistors. Applying up to 20 A DC allows WINRES-20 to measure the winding resistance of transfor

TURA-03B is designed by advanced engineering technology to measure the turns ratio of single and three-phase transformers. TURA-03B has a fast, easy and accurate TTR measurement features for current, voltage and power transformers by its user-friendly software. TURA-03B is a batt

TURA-03 is designed by advanced engineering technology to measure the turns ratio of single and three-phase transformers. TURA -03 has a fast, easy and accurate TTR measurement features for current, voltage and power transformers by its user-friendly software. By using ANSI/IEEE

The PD-TaD 80 portable PD diagnostics system is used in combination with a BAUR VLF generator for carrying out: Partial discharge testing and location VLF cable testing with parallel partial discharge testing Dissipation factor measurement

The PD-TaD 62 portable PD diagnostics system is used in combination with a BAUR VLF generator for carrying out: Partial discharge testing and location VLF cable testing with parallel partial discharge testing Parallel partial discharge and dissipation factor measurement Full MWT

The MD 9010 is one of the smallest and lightest of our digital multimeters. The MD 9010 unit can be used for a wide variety of applications. The high accuracy, LCD display and features including non-contact voltage detection and an autocheck function make the multimeter extremely

The digital multimeter MD 9016 is a perfect combination of size, Innovative functions and built-in PC communication. It is capable to detect and diagnose most electrical and electrotechnical problems. Display with large easy-to-read figures and one-handed operation make MD 9016 a

CAT IV / 1000 V overvoltage category and TRMS measurement of AC current and voltage are key features of the MD 9040. That?s why it is particularly suitable for performing measurements on power supply sources in the most demanding applications in the industrial sector. Its high ac

The MD 9050 ranks among the best multimeters on the market. High resolution and accuracy, 2-line LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, non-contact voltage detection, conductance measurement,

The MD 9060 ranks among the most accurate multimeters with a large bandwidth and very high resolution. Metrel MD 9060 is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency, large 2-line 500.000 counts L

The MD 9070 is a high accuracy insulation and continuity multimeter which may be used in a CAT IV / 600 V environment. It’s dual digital display provides all needed data to the operator while it’s size ensures that it can be operated single handedly. The instrument is equipped wi

Features : Relay & CT Tester function Multimeter Function Easy to control External PC control function (Optional) Advanced high power constant current source with pulse width modulation technology

The BAUR protrac® pin-pointing system is used for the precise pin-pointing of cable and cable sheath faults. Combining acoustic and electromagnetic fault pin-pointing with sheath fault location in one system, it is ideal for universal application. Unique operating convenience tha

Check timing and pick up value for AC/DC relay -Check directional over current and df/dt -Check pick-up, instant tripping, 2 harmonic restraint of differential relay -Check line protection scheme performance

BAUR Report Manager, the external USB interface for oil testers, is used to automatically export measurement logs from BAUR oil testers to a USB drive. Extensive language support and the integration of customised logos simplify professional reporting.

The BAUR ITS Lite software is used to automatically read measurement results and to design and archive measurement logs of the BAUR DTA 75 C, DTA 100 C and DTL C insulating oil testers. The logs can be saved in PDF format or as a flexible text file (*.txt). Extensive language sup

The established analysis and diagnosis of insulating oils with BAUR DTL C provides valuable findings in the scientific work, research and development. The extensive knowledge about the current state of insulating liquids becomes more important even for the operational power netwo

The BAUR DTA 100 C oil breakdown voltage tester fully automatically tests the electrical breakdown strength of insulating liquids. Test sequences can be accomplished easily and fully automatically in compliance with all international and national standards. With reliable, informa

The BAUR DPA 75 C oil breakdown voltage tester automatically tests the electrical breakdown strength of insulating liquids. Test sequences can be accomplished easily and fully automatically in compliance with all international and national standards. With reliable, informative te

The portable BAUR viola and viola TD devices are used for testing medium-voltage cables and electrical equipment (generators, transformers and switchgear) for cable sheath testing for cable diagnostics (viola TD): -Dissipation factor measurement and Monitored Withstand Test with

The portable and high performance high-voltage testing and diagnostics device is available in two different configurations: frida: Used for cable and cable sheath testing of medium-voltage cables and electrical equipment up to 20 kV. Another function is insulation testing on elec

The BAUR tracy partial discharge inductor is used for the exact location of partial discharge positions in cables and cable accessories (partial discharge pin-pointing). Tracy induces a signal at the pre-located partial discharge position in the cable that can be recorded with a

liona is a portable online PD spot tester for measuring and locating partial discharges in cables and switchgear during normal mains operation. liona allows the testing of cable systems and electrical equipment for partial discharge activities online and without having to switch

The portable PGK 25 DC HV tester is used for DC voltage testing up to 25 kV of paper-insulated mass-impregnated cables and electrical equipment in the medium- voltage network. The PGK 25 is characterised by its low weight of only 16.5 kg, by its easy operation and by its solid co

The BAUR PGK 150/5 HB AC/DC HV test set is used to generate continuously adjustable test voltages: , DC voltages with positive or negative polarity , AC voltages at mains frequency The test set consists of an operating unit and an HV unit. The operating unit contains all operatin

The BAUR PGK 150 HB AC/DC HV test set is used to generate continuously adjustable test voltages: , DC voltages with positive or negative polarity , AC voltages at mains frequency The test set consists of an operating unit and an HV unit. The operating unit contains all operating

The BAUR PGK 110/5 HB AC/DC HV test set is used to generate continuously adjustable test voltages: , DC voltages with positive or negative polarity , AC voltages at mains frequency The test set consists of an operating unit and an HV unit. The operating unit contains all operatin

The BAUR PGK 110 HB AC/DC HV test set is used to generate continuously adjustable test voltages: , DC voltages with positive or negative polarity , AC voltages at mains frequency The test set consists of an operating unit and an HV unit. The operating unit contains all operating

The compact cable fault location system, Syscompact 4000, is used for the pre-location and pin-pointing of faults on low- and medium-voltage cables. Thanks to the novel operational concept and the integrated location methods, cable faults can be located more rapidly and easily wi

The IRG 4000 time domain reflectometer is integrated in BAUR cable fault location systems and is used in combination with the system software for locating cable faults in single and three-phase cable systems. Thanks to the novel operational concept, cable faults can be located mo

Surge voltage generators enable accurate location of high resistance, low resistance and intermittent faults on high, medium and low voltage cables. Output voltage is continuously adjustable in the ranges 0 , 8 kV, 0 , 16 kV and 0 , 32 kV. Discharging of high voltage capacitors i

Surge voltage generators enable accurate location of high resistance, low resistance and intermittent faults on high, medium and low voltage cables. Output voltage is continuously adjustable in the ranges 0 , 8 kV, 0 , 16 kV and 0 , 32 kV. Discharging of high voltage capacitors i

Surge voltage generators enable accurate location of high resistance, low resistance and intermittent faults on high, medium and low voltage cables. Output voltage is continuously adjustable in the ranges 0 , 8 kV, 0 , 16 kV and 0 , 32 kV. Discharging of high voltage capacitors i

Surge voltage generators enable accurate location of high resistance, low resistance and intermittent faults on high, medium and low voltage cables. Output voltage is continuously adjustable in the ranges 0 , 8 kV, 0 , 16 kV and 0 , 32 kV. Discharging of high voltage capacitors i

The compact SSG 500 surge voltage generator is used to generate surge and DC voltage and can be used for the pre-location and pin-pointing of cable faults in buried power cables, in particular low voltage cables. The SSG 500 surge voltage generator is arranged in a 19” housing. M

The shirla sheath test and fault location device is used for cable and cable sheath testing, and for the pre-location and pin-pointing of cable sheath faults and cable faults due to earth contact. The fault pre-location is based on the measuring bridge principle according to Murr

The audio frequency transmitter TG 600 is especially designed for accurate location of cable faults and joints according to the twist method. With the display of input and output current the selection of the correct adjustment is easy. The capacitive compensation protects the hig

The TG 20/50 is a portable, mains or battery-operated audio frequency transmitter. Together with the UL 30 universal receiver and the SP 30 search coil, the audio frequency transmitter is used for tracing, pin-pointing using the twist method and for determining the depth of cable

The CL 20 cable locator comprising a transmitter and a receiver is used to determine the exact location of cables and metal pipes. The ability to determine laying depths of up to 4.5 m and to measure signal currents at the touch of a button allows you to obtain reliable informati

The KSG 200 cable identification system is used to identify single- and multi-core cables in a cable bundle or cable loom. By using the KSG 200, the risk of accidentally cutting a live phase is significantly reduced. This way, you will avoid the following in future: , High level

The ATG 6000 burn down transformer is used for the impedance reduction of cable faults in low and medium-voltage networks. This converts high-resistive, difficult to locate and intermittent faults to low-resistive faults that are easy to locate with the Time Domain Reflectometry

The ATG 2 burn down transformer is used for the impedance reduction of cable faults in low and medium-voltage networks. This converts high-resistive, difficult to locate and intermittent faults to low-resistive faults that are easy to locate with the Time Domain Reflectometry met

Digital Transformer Analyser (MI 3280) is a Multi-function, portable battery (Li-ion) powered test instrument with excellent IP protection: IP65 (case closed), IP54 (case open), intended for diagnosing of: turn ratio, phase deviation and excitation current of single and three pha

PW636i (6*32A, 4*300V) is the computer aided relay testing equipment.One of the most significant features of the relay test set is its high power capacity for its current amplifiers.It is the ideal relay test solution for applications which require large current output.

PCT200Ai is the current transformer test set can finish various tests of different transformers. Compared with PCT200i,its accuracy is higher.This CT analyzer can test the 0.2s class CT.Only this CT analyzer , the high-accuracy current transformer test set has passed the tests he

PCT200i is specially designed for current transformer characteristic test. Compared with PCT200Li,PCT200i owns more test items and higher technical parameters.This CT analyzer can finish the measurement class CT and TYP class CT.The additional functions include ratio and angle di

T200A is a relay test kit based on PWM technology. The single phase relay tester has numerous powerful features.

L336i-E is the new economic version of relay test equipment L336i. This relay test kit is with 3*20A and 4*300V, only 8.8kg with powerful Powertest software,it can test most types of modern multi-function relays. L336i-E is the best portable and economic choice for relay test eng

POM2 (optional output) is the three-phase relay testing system. This universal test set with 3 current outputs is capable of testing all types of protective relays. This relay tester has in-built output monitoring and recording function and also supports testing IEC 61850 IED. Th

POM2 (optional output) is the six current relay testing system. This universal test set with 6 current outputs is capable of testing all types of protective relays. This relay tester has in-built output monitoring and recording function and also supports testing IEC 61850 IED. Th

L336i is a portable protection relay test set.It is a great innovative breakthrough of PONOVO for its incomparable lightest solution (8.8kg) with 6 currents and 4 voltages.This Laptop size relay test set can test all types of modern multi-function relays.It is the first choice fo

MI 3202 GigaOhm 5 kV provides a quick and accurate reading of insulation resistance. The large segment LCD screen with backlight offers easy reading of results. The analogue/digital display with analogue graph has a range of up to 1 T? for insulation resistance and 600 V for volt

MI 3201 TeraOhm 5 kV insulation tester is a portable instrument intended to measure insulation resistance through the use of high voltage DC test voltages up to 5 kV. The large LCD screen allows real-time R(t) graphs to be displayed.

MI 3205 TeraOhm XA 5kV is a portable battery (Li-ion) or mains powered test instrument with excellent IP protection (IP65 case closed and IP54 case open), intended for diagnosing of Insulation Resistance by using high test voltages of up to 5 kV. It is designed and produced with

MI 3242 MicroOhm 2A is a portable low resistance ohmmeter used to measure low resistances of switches, relays, connectors, bus bars, power distribution cable joints, motor & generator winding, power transformers, power inductors, rail track joints, wire and cable resistance, weld

MicroOhm MI 3250 is portable low resistance ohmmeter for measuring low resistances of breakers and switches, busbars, cable joints, small to medium sized transformer and motor windings for industrial application, etc., with test current up to 10 A.

MI 3252 MicroOhm 100A is a portable low resistance ohmmeter used to measure low contact resistances of breakers and switches, busbars using test current from 100 mA to 100 A.

The MI 2883 Energy Master is a hand-held three phase power quality analyser, specially designed for energy logging and subsequently efficiency calculation. Reducing energy use reduces energy costs and may result in a financial cost saving. Energy Master serves as a perfect tool f

The MI 2885 Master Q4 is an ideal troubleshooting tool. The recorders are designed to automatically record all important data and waveforms of voltage events like Dips and Swells. In addition the user can set 7 optional triggers for capturing waveforms of selected quantities. A l

The NEW MI 2892 Power Master is a hand-held three phase power quality ana?lyser with a large easy-to-read graphical colour display enabling the user to detect harmonics, phasors and waveforms anomalies in the installation simply by con?necting the device. The instrument is design

Versatility, sturdy case, high accuracy and lots of measurement functions are key features of the current clamp MD 9210. If you?re looking for a universal current clamp offering good value for money, look no further!

The MD 9226 is a professional DC and TRMS AC current clamp meter capable of measuring capacitance and frequency. It is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency. The MD 9226 has a wide range of

The MD 9231 is an industrial TRMS AC and DC current clamp meter with a wide jaw opening and is capable of measuring currents up to 1000 A. It has the ability to measure capacitance and frequency and is equipped with a built-in VFD feature that makes the instrument capable of meas

The MD 9235 is a Slim-Jaw current clamp meter with ability to measure 3-Phase Unbalanced-Load + kWHr recording. The MD 9235 enables TRMS AC current measurement up to 600 A, single and 3-phase power analysis, total power factor and resistance measurement. Display with large easy-t

The MD 9240 is a high-quality and extremely easy to handle power clamp meter. The current clamp enables TRMS AC current measurement up to 1000 A, single-phase power analysis, DC, AC voltage measurement, temperature measurement and more. [my_shortcode]

The MD 9250 is the first Clamp Meter that meets overvoltage category CAT IV 1000 V. MD 9250 is a high quality clamp meter specially designed for single-hand operation, built-in measuring functions; TRMS AC/DC (current, voltage), capacitance, temperature and full range resistance

MD 9272 is a unique earth leakage clamp meter. It not just has the ability to accurately read the TRMS AC leakage current of a system, it can also detect losses in the system and suggest possible reasons for the loss. The voltage (AC/DC), frequency, power, harmonic, power factor